本本出现了每次要输入HDD USER PASSWORD 怎么样才能取消掉这...
解决方法如下:1. 开机的时候按键盘F2进入BIOS2. 进入Security选项3. 选择Change Supervisor Password设置BIOS密码,4. 选择Set User Password设置开机密码5. 先进 Set Supervisor Password 键入两次设置的密码6. 然后在 Password on boot 选择“Disabled”那项7. 最后直接按“F10”,再按“Y”键
关闭电脑上的HDD PASSWORD密码,我自己知道密码,在BIOS里,...
domain account 指的是域帐号,域的概念你可以百度百科一下,简单说电脑加入域后,登陆的时候登陆界面最下边会有一行“登入到”,后面的那个名称就是你的域名称;account就是你的登陆域时所用的那个账号。
比如nj\paul ,nj指的就是domain,paul 指的就是account
为何HTTP Password 修改后新老密码均可使用
问题报告编号为SPR #HSPR7CX73U标题为:Old password doesn't get inactive immediately after changing DWA password开发团队认为这种行为是符合设计的:When Web users change their Internet passwords, the Domino HTTP server remembers the new Internet password in its cache, as well as the old password. Caching is useful because it can take some time for the password change to take effect, as the change must be processed by the Domino administration server and replicated throughout the Domino environment. Password caching allows the HTTP server to immediately recognize the user's new Internet password and accept it for login, even though the password change information may not be finished replicating in the Domino environment. Prior to Domino 6.0.3, password change caching was available only for single session authentication. Password changes can now be cached when the HTTP server is configured for SSO. The referenced tech note is incorrect (I have submitted a request to have the tech note updated to say that this feature was implemented for SSO users in 6.0.3).Without password caching, then the user can only login by supplying the password that can be verified against the password information found by the server in the Domino Directory. The server Notes.ini parameter HTTP_PWD_CHANGE_CACHE_HOURS can be configured to be 0 to avoid password caching. If there is no password caching, the user cannot know for sure whether the server's directory in the environment has the password update. In the case where the Domino directory replica has not yet been updated, the user cannot use the new password and must continue to use the old password.Domino 提供了 HTTP 密码缓存功能并非产品缺陷。
在 HTTP 任务未重启的前提下,48 小时内再次登录时新老密码均有效。
如何查看oracle数据库的user 和password
运行 cmd 按如下输入命令sqlplus / as sysdba ---------以sys登陆 超级用户(sysdba)alter user 用户名 account unlock; --------- 解除锁定(必须带“;”号)alter user 用户名 identified 密码; -------------修改密码然后用你改好的密码登陆就行如果可以登录任意的一个用户可以通过一下方法来知道当前有哪些用户select distinct owner from all_objects 查看当前用户oracle有三个默认的用户名和密码~1.用户名:sys密码:change_on_install2.用户名:system密码:manager3.用户名:scott密码:tiger
如何修改 EM12c 中 SYSMAN 用户的密码
If the current SYSMAN password is known:1. Stop all the OMS:$ cd /bin$ ./emctl stop oms Execute the same command on all the OMS machines including the primary OMS machine. Do not include '-all' as the Admin Server needs to be up during this operation.2. Modify the SYSMAN password:$ cd /bin$ ./emctl config oms -change_repos_pwd Note:The above command will prompt you for the current password of the SYSMAN user and the new password.The password will be modified at the Repository Database as well as the WLS Credential store and the monitoring credentials for the 'OMS and Repository' target.Along with the SYSMAN password, this command will modify the password for the ALL the EM users (SYSMAN_MDS, BIP, SYSMAN_OPSS, SYSMAN_APM, SYSMAN_RO, MGMT_VIEW) created in the Repository Database.Example output:$ ./emctl config oms -change_repos_pwd Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0 Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.Enter Repository User's Current Password :Enter Repository User's New Password :Changing passwords in backend … Passwords changed in backend successfully.Updating repository password in Credential Store… Successfully updated Repository password in Credential Store.Restart all the OMSs using 'emctl stop oms -all' and 'emctl start oms'.Successfully changed repository password.3. Stop the Admin server on the primary OMS machine and re-start all the OMS:$ cd /bin$ ./emctl stop oms -all$ ./emctl start oms If the current SYSMAN password is unknown:1. Stop all the OMS:$ cd /bin$ ./emctl stop oms Execute the same command on the primary OMS machine as well. Do not include '-all' as the Admin Server needs to be up during this operation.If the version of OMS is 12.1.0.1 and password is manually changed at the Database level, apply Patch 13697830 on OMS Home and then run the command below to get the password updated in all configurations.2. Modify the SYSMAN password:$ cd /bin$ ./emctl config oms -change_repos_pwd -use_sys_pwd -sys_pwd -new_pwd Note:The '-use_sys_pwd' is used to connect to the database as a SYS user and modify the sysman password in the Repository database.The current sysman password is not prompted for and only the new password needs to be entered. This will allow the reset of the old password to the new password entered.The password will be modified at the Repository Database as well as the WLS Credential store and the monitoring credentials for the 'OMS and Repository' target.Along with the SYSMAN password, this command will modify the password for the ALL the EM users (SYSMAN_MDS, BIP, SYSMAN_OPSS, SYSMAN_APM, SYSMAN_RO, MGMT_VIEW) created in the Repository Database.Example output:$ ./emctl config oms -change_repos_pwd -use_sys_pwd -sys_pwd oracle123 -new_pwd oracle12 Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0 Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.Changing passwords in backend … Passwords changed in backend successfully.Updating repository password in Credential Store… Successfully updated Repository password in Credential Store.Restart all the OMSs using 'emctl stop oms -all' and 'emctl start oms'.Successfully changed repository password.3. Stop the Admin server on the primary OMS machine and re-start all the OMS:$ cd /bin$ ./emctl stop oms -all$ ./emctl start oms
reset password是什么意思
reset password重置密码例句1 To change the password for% 1, click Reset Password.要更改%1的密码,请单击重设密码。
2 Reset password for selected user.重置选定用户的密码。
3 Recovering lost or forgotten passwords How to reset your password if you've forgotten it.恢复失去或者忘记的密码怎样重新安放你的密码,如果你已经忘记它。
有用过changepassword.cgi的兄弟没
分为三种情况讨论:一、开机KEY为空,直接回车进入系统,如想取消空密码则执行情况二。
二、可以进入BIOS,不需要密码(enable)1、启动计算机,当看到DELL启动画面时,按“F2”键进入BIOS;2、按"Alt+F"恢复CMOS原始设置;3、重启即成功。
三、可以进入BIOS,需要密码(disable)1、拆开笔记本电脑或机箱;2、在主板找到“BIOS”电池并取下;3、静置10秒钟;4、安装回去,恢复成功;注意事项:第三种情况要小心谨慎,不能损坏主板。
转载请注明出处51数据库 » changeuserpassword