人生如梦何必自恋
你看这个怎么样,不长吧。tc/win-tc运行通过.
#include<graphics.h>
#include<math.h>
#include<dos.h>
#define pi 3.1415926
#define X(a,b,c) x=a*cos(b*c*pi/180-pi/2)+300;
#define Y(a,b,c) y=a*sin(b*c*pi/180-pi/2)+240;
#define d(a,b,c) X(a,b,c);Y(a,b,c);line(300,240,x,y)
void init()
{
int i,l,x1,x2,y1,y2;
setbkcolor(1);
circle(300,240,200);
circle(300,240,205);
circle(300,240,5);
for(i=0;i<60;i++)
{
if(i%5==0) l=15;
else l=5;
x1=200*cos(i*6*pi/180)+300;
y1=200*sin(i*6*pi/180)+240;
x2=(200-l)*cos(i*6*pi/180)+300;
y2=(200-l)*sin(i*6*pi/180)+240;
line(x1,y1,x2,y2);
}
}
main()
{
int x,y;
int gd=VGA,gm=2;
unsigned char h,m,s;
struct time t[1];
initgraph(&gd,&gm,"d:\\tc");
init();
setwritemode(1);
gettime(t);
h=t[0].ti_hour;
m=t[0].ti_min;
s=t[0].ti_sec;
setcolor(7);
d(150,h,30);
setcolor(14);
d(170,m,6);
setcolor(4);
d(190,s,6);
while(!kbhit())
{
while(t[0].ti_sec==s)
gettime(t);
sound(400);
delay(70);
sound(200);
delay(30);
nosound();
setcolor(4);
d(190,s,6);
s=t[0].ti_sec;
d(190,s,6);
if (t[0].ti_min!=m)
{
setcolor(14);
d(170,m,6);
m=t[0].ti_min;
d(170,m,6);
}
if(t[0].ti_hour!=h)
{
setcolor(7);
d(150,h,30);
h=t[0].ti_hour;
d(150,h,30);
sound(1000);
delay(240);
nosound();
delay(140);
sound(2000);
delay(240);
nosound();
}
}
getch();
closegraph();
}
请问fluent6.3.26怎么使用，打开那个图形编辑器
6.3就是这个界面，习惯就好，话说这个界面别小看他，很强大的，你敲一下回车，就会看到有一个列表共你选择，比如说选择define，如果你不知道define里包含什么，还可以继续敲回车，同样会给出列表供你选择，这个比菜单的内容丰富的多，所以说功能强大。。。
回到正题吧，你可以到流体中文网cfluid和傲雪论坛里学习，有很多资料，但是最基本的中文帮助，算例精选，6.3算例文件你必须有，这样才好入门。。。还有一个方法就是找本书，按照上面的做，也是很好的方法，因为一般软件类的书籍都会带光盘的，文件、视频都会有的，也是非常好的你找不到的可以email我，qq54320824@qq.com
图形界面是后处理是才用到的，只有你有一定计算结果（那怕是一步），那个display里的云图之类的才能用的。。。另外tecplot的处理能力也是相当的好，高版本的直接对cas和dat（是同时读进行读取），不用先从fluent里导出。。。有人说tcplot只能显示分速度，不能显示合速度，确实是这样的，不过往里面输入个公式就行了，网上有，找找去
求用c语言编写的贪吃蛇程序
#include <stdio.h>
#include <graphics.h>
#include <stdlib.h>
#include <dos.h> /*引用的库函数*/
#define LEFT 0x4b00
#define RIGHT 0x4d00
#define DOWN 0x5000
#define UP 0x4800
#define ESC 0x011b/*宏定义键名*/
#define N 200
int i,key;
int level;/*游戏等级*/
int score=0;/*得分*/
int gamespeed;/*游戏速度*/
struct Food
{
int x;/*食物的横坐标*/
int y;/*食物的纵坐标*/
int yes;/*判断是否要出现食物的变量*/
}food;/*食物的结构体*/
struct Snake
{
int x[N];
int y[N];
int node;/*蛇的节数*/
int direction;/*蛇移动方向*/
int life;/* 蛇的生命,0活着,1死亡*/
}snake;/*蛇的结构体*/
void Choicelevle(void);/*选择游戏等级*/
void Init(void);/*图形驱动*/
void Close(void);/*图形结束*/
void DRAW(void);/*游戏区域*/
void GameOver(void);/*结束游戏*/
void GamePlay(void);/*玩游戏具体过程*/
void PrScore(void);/*输出成绩*/
/*主函数*/
void main(void)
{
Init();/*图形驱动*/
Choicelevle();/*选择游戏等级*/
DRAW();/*游戏区域*/
GamePlay();/*玩游戏具体过程*/
Close();/*图形结束*/
}
/*图形驱动*/
void Init(void)
{
int gd=DETECT,gm;
initgraph(&gd,&gm,"\\turboc2"); /*初始化图形系统*/
cleardevice(); /*清除图形界面*/
}
/*选择游戏等级*/
void Choicelevle(void)
{char name[20];
setcolor(YELLOW);
settextstyle(0,0,6);
outtextxy(150,150,"Snake");
setcolor(GREEN);
settextstyle(0,0,1);
outtextxy(200,250,"please put in your English name:");
outtextxy(200,270,"Choice levle from 1-9.");
outtextxy(300,320,"name:yangzilong");/*制作人姓名*/
outtextxy(300,350,"number:0902060226");/*制作人学号*/
outtextxy(300,380,"class:computer science 0602");/*制作人班级*/
getch();
printf("please putin your name:");
gets(name);
printf("please choice levle:");
scanf("%d",&level);
gamespeed=100000-400*level-300*level*level;
if(level>9||level<1)
{cleardevice(); /*清除图形界面*/
setcolor(YELLOW); /*设置字体颜色*/
settextstyle(0,0,2); /*设置字体类型*/
outtextxy(150,200,"level input error"); /*显示文本*/
getch();
level=1;
}
}
void DRAW(void)
{cleardevice(); /*清屏*/
setcolor(2);
setlinestyle(SOLID_LINE,0,THICK_WIDTH);/*设置线型*/
rectangle(45,45,465,325);
}
/*玩游戏具体过程*/
void GamePlay(void)
{setcolor(5);
setlinestyle(SOLID_LINE,0,THICK_WIDTH);/*设置线型*/
randomize();/*随机数发生器*/
food.yes=1;/*1表示需要出现新食物,0表示已经存在食物*/
snake.life=0;/*活着*/
snake.direction=1;/*方向往右*/
snake.x[0]=320;snake.y[0]=240;/*蛇头*/
snake.x[1]=330;snake.y[1]=240; /*蛇的第二节位置*/
snake.node=3;/*节数*/
PrScore();/*输出得分*/
while(1)/*可以重复玩游戏,压ESC键结束*/
{
while(!kbhit())/*在没有按键的情况下,蛇自己移动身体*/
{
if(food.yes==1)/*需要出现新食物*/
{
food.x=rand()%360+70;
food.y=rand()%250+60;
while(food.x%10!=0)/*食物随机出现后必须让食物能够在整格内,这样才可以让蛇吃到*/
food.x++;
while(food.y%10!=0)
food.y++;
food.yes=0;/*画面上有食物了*/
}
if(food.yes==0)/*画面上有食物了就要显示*/
{
setcolor(GREEN);
rectangle(food.x,food.y,food.x+10,food.y-10);
}
for(i=snake.node-1;i>0;i--)/*蛇的每个环节往前移动*/
{
snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1];
}
/*1,2,3,4表示右,左,上,下四个方向,通过这个控制来移动蛇头*/
switch(snake.direction)
{
case 1: snake.x[0]+=10;break;
case 2: snake.x[0]-=10;break;
case 3: snake.y[0]-=10;break;
case 4: snake.y[0]+=10;break;
}
for(i=3;i<snake.node;i++)/*从蛇的第四节开始判断是否撞到自己了，因为蛇头为两节，第三节不可能拐过来*/
{
if(snake.x[i]==snake.x[0]&&snake.y[i]==snake.y[0])
{
GameOver();/*显示失败*/
snake.life=1; /*蛇死*/
break;
}
}
/*如果蛇头碰到墙壁，蛇头从对面墙出来*/
if(snake.x[0]<50)
{snake.x[0]=450;/*如果蛇头越过左边界,则从右边界进入*/
snake.y[0]=snake.y[0];/*纵坐标不变*/
for(i=snake.node-1;i>0;i--)
{snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1]; /*蛇的其他节数向前推进*/
}
{
setfillstyle(SOLID_FILL,0); /*设置填充模式和颜色，0表示黑色*/
bar(50,55,455,315);/*bar是表示填充的范围的函数*/
}
}
else
if(snake.x[0]>450)
{snake.x[0]=50;/*如果蛇头越过右边界,则蛇头从左边界进入*/
snake.y[0]=snake.y[0];/*纵坐标不变*/
for(i=snake.node-1;i>0;i--)
{snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1]; /*蛇的其他节数向前推进*/
}
{
setfillstyle(SOLID_FILL,0); /*设置填充模式和颜色，0表示黑色*/
bar(50,55,455,315);/*bar是表示填充的范围的函数*/
}
}
else
if(snake.y[0]<60)
{snake.y[0]=320;/*如果蛇头越过上边界,则从下边界进入*/
snake.x[0]=snake.x[0];/*横坐标不变*/
for(i=snake.node-1;i>0;i--)
{snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1]; /*蛇的其他节数向前推进*/
}
{
setfillstyle(SOLID_FILL,0); /*设置填充模式和颜色，0表示黑色*/
bar(50,55,455,315);/*bar是表示填充的范围的函数*/
}
}
else
if(snake.y[0]>320)
{snake.y[0]=60;/*如果蛇头越过下边界,则从上边界进入*/
snake.x[0]=snake.x[0];/*横坐标不变*/
for(i=snake.node-1;i>0;i--)
{snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1]; /*蛇的其他节数向前推进*/
}
{
setfillstyle(SOLID_FILL,0); /*设置填充模式和颜色，0表示黑色*/
bar(50,55,455,315);/*bar是表示填充的范围的函数*/
}
}
if(snake.life==1)/*如果蛇死就跳出内循环，重新开始*/
break;
if(snake.x[0]==food.x&&snake.y[0]==food.y)/*吃到食物以后*/
{
setcolor(0);/*把画面上的食物东西去掉*/
rectangle(food.x,food.y,food.x+10,food.y-10); /*用当前线型和颜色画一矩形*/
snake.x[snake.node]=-20;snake.y[snake.node]=-20;
/*新的一节先放在看不见的位置,下次循环就取前一节的位置*/
snake.node++;/*蛇的身体长一节*/
food.yes=1;/*画面上需要出现新的食物*/
score+=10; /*每吃掉一食物,得分累加10分*/
if(score%100==0)
{level++;gamespeed=100000-400*level-300*level*level;/*每吃掉10食物提升一级,速度加快*/
PrScore();/*输出新得分*/
setcolor(YELLOW); /*设置字体颜色*/
settextstyle(0,0,4); /*设置字体类型*/
outtextxy(150,200,"LEVEL UP"); /*显示文本*/
if(level==10)
{level=1,gamespeed=100000-400*level-300*level*level;}
delay(6000000);
delay(6000000);
delay(6000000);
delay(6000000);
delay(6000000);
delay(6000000);
delay(6000000);
bar(50,55,455,315);/*bar是表示填充的范围的函数*/
}
PrScore();/*输出新得分*/
}
setcolor(4);/*画出蛇*/
for(i=0;i<snake.node;i++)
rectangle(snake.x[i],snake.y[i],snake.x[i]+10,
snake.y[i]-10);
delay(gamespeed); /*控制游戏速度*/
setcolor(0);
rectangle(snake.x[snake.node-1],snake.y[snake.node-1],
snake.x[snake.node-1]+10,snake.y[snake.node-1]-10);
} /*endwhile（！kbhit）*/ /*用黑色去除蛇的的最后一节*/
if(snake.life==1)/*如果蛇死就跳出循环*/
break;
key=bioskey(0);/*接收按键*/
if(key==ESC)/*按ESC键退出*/
break;
else
if(key==UP&&snake.direction!=4)
/*判断是否往相反的方向移动*/
snake.direction=3;
else
if(key==RIGHT&&snake.direction!=2)
snake.direction=1;
else
if(key==LEFT&&snake.direction!=1)
snake.direction=2;
else
if(key==DOWN&&snake.direction!=3)
snake.direction=4;
}/*endwhile(1)*/
}
/*游戏结束*/
void GameOver(void)
{
cleardevice(); /*清屏*/
PrScore();
setcolor(RED); /*设置字体颜色*/
settextstyle(0,0,4); /*设置字体类型*/
outtextxy(200,200,"GAME OVER"); /*显示文本*/
getch();
}
/*输出成绩及游戏等级*/
void PrScore(void)
{
char str1[20];/*设置字符型数组*/
setfillstyle(SOLID_FILL,0);
bar(50,15,390,35); /*填充矩形框*/
setcolor(6); /*设置文本颜色*/
settextstyle(0,0,2); /*设置数组显示位置*/
sprintf(str1,"score %d level %d",score,level);/*显示数组内容*/
outtextxy(55,20,str1);
setcolor(YELLOW); /*设置字体颜色*/
settextstyle(0,0,2); /*设置字体类型*/
outtextxy(250,400,"EXIT=ESC ");/*显示文本*/
}
void Close(void)
{
closegraph();
}
001a
tc界面图形程序11
网上搜的，运行了一下，通过。呵呵。
#include "graphics.h"
#include "math.h"
#include "dos.h"
#include "conio.h"
#include "stdlib.h"
#include "stdio.h"
#include "stdarg.h"
#define MAXPTS 15
#define PI 3.1415926
struct PTS {
int x,y;
};
double AspectRatio=0.85;
void LineToDemo(void)
{
struct viewporttype vp;
struct PTS points[MAXPTS];
int i, j, h, w, xcenter, ycenter;
int radius, angle, step;
double rads;
printf(" MoveTo / LineTo Demonstration" );
getviewsettings( &vp );
h = vp.bottom - vp.top;
w = vp.right - vp.left;
xcenter = w / 2; /* Determine the center of circle */
ycenter = h / 2;
radius = (h - 30) / (AspectRatio * 2);
step = 360 / MAXPTS; /* Determine # of increments */
angle = 0; /* Begin at zero degrees */
for( i=0 ; i<MAXPTS ; ++i )
{ /* Determine circle intercepts */
rads = (double)angle * PI / 180.0; /* Convert angle to radians */
points[i].x = xcenter + (int)( cos(rads) * radius );
points[i].y = ycenter - (int)( sin(rads) * radius * AspectRatio );
angle += step; /* Move to next increment */
}
circle( xcenter, ycenter, radius ); /* Draw bounding circle */
for( i=0 ; i<MAXPTS ; ++i )
{ /* Draw the cords to the circle */
for( j=i ; j<MAXPTS ; ++j )
{ /* For each remaining intersect */
moveto(points[i].x, points[i].y); /* Move to beginning of cord */
lineto(points[j].x, points[j].y); /* Draw the cord */
}
}
}
main()
{
int driver,mode;
driver=VGA;mode=VGAHI;
initgraph(&driver,&mode,"");
setcolor(3);
setbkcolor(GREEN);
LineToDemo();
getch();
}
贪吃蛇 C语言 简易程序设计
#define N 200
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFT 0x4b00
#define RIGHT 0x4d00
#define DOWN 0x5000
#define UP 0x4800
#define ESC 0x011b
int i,key;
int score=0;/*得分*/
int gamespeed=50000;/*游戏速度自己调整*/
struct Food
{
int x;/*食物的横坐标*/
int y;/*食物的纵坐标*/
int yes;/*判断是否要出现食物的变量*/
}food;/*食物的结构体*/
struct Snake
{
int x[N];
int y[N];
int node;/*蛇的节数*/
int direction;/*蛇移动方向*/
int life;/* 蛇的生命,0活着,1死亡*/
}snake;
void Init(void);/*图形驱动*/
void Close(void);/*图形结束*/
void DrawK(void);/*开始画面*/
void GameOver(void);/*结束游戏*/
void GamePlay(void);/*玩游戏具体过程*/
void PrScore(void);/*输出成绩*/
/*主函数*/
void main(void)
{
Init();/*图形驱动*/
DrawK();/*开始画面*/
GamePlay();/*玩游戏具体过程*/
Close();/*图形结束*/
}
/*图形驱动*/
void Init(void)
{
int gd=DETECT,gm;
initgraph(&gd,&gm,"c:\\tc");
cleardevice();
}
/*开始画面，左上角坐标为（50，40），右下角坐标为（610，460）的围墙*/
void DrawK(void)
{
/*setbkcolor(LIGHTGREEN);*/
setcolor(11);
setlinestyle(SOLID_LINE,0,THICK_WIDTH);/*设置线型*/
for(i=50;i<=600;i+=10)/*画围墙*/
{
rectangle(i,40,i+10,49); /*上边*/
rectangle(i,451,i+10,460);/*下边*/
}
for(i=40;i<=450;i+=10)
{
rectangle(50,i,59,i+10); /*左边*/
rectangle(601,i,610,i+10);/*右边*/
}
}
/*玩游戏具体过程*/
void GamePlay(void)
{
randomize();/*随机数发生器*/
food.yes=1;/*1表示需要出现新食物,0表示已经存在食物*/
snake.life=0;/*活着*/
snake.direction=1;/*方向往右*/
snake.x[0]=100;snake.y[0]=100;/*蛇头*/
snake.x[1]=110;snake.y[1]=100;
snake.node=2;/*节数*/
PrScore();/*输出得分*/
while(1)/*可以重复玩游戏,压ESC键结束*/
{
while(!kbhit())/*在没有按键的情况下,蛇自己移动身体*/
{
if(food.yes==1)/*需要出现新食物*/
{
food.x=rand()%400+60;
food.y=rand()%350+60;
while(food.x%10!=0)/*食物随机出现后必须让食物能够在整格内,这样才可以让蛇吃到*/
food.x++;
while(food.y%10!=0)
food.y++;
food.yes=0;/*画面上有食物了*/
}
if(food.yes==0)/*画面上有食物了就要显示*/
{
setcolor(GREEN);
rectangle(food.x,food.y,food.x+10,food.y-10);
}
for(i=snake.node-1;i>0;i--)/*蛇的每个环节往前移动,也就是贪吃蛇的关键算法*/
{
snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1];
}
/*1,2,3,4表示右,左,上,下四个方向,通过这个判断来移动蛇头*/
switch(snake.direction)
{
case 1:snake.x[0]+=10;break;
case 2: snake.x[0]-=10;break;
case 3: snake.y[0]-=10;break;
case 4: snake.y[0]+=10;break;
}
for(i=3;i<snake.node;i++)/*从蛇的第四节开始判断是否撞到自己了，因为蛇头为两节，第三节不可能拐过来*/
{
if(snake.x[i]==snake.x[0]&&snake.y[i]==snake.y[0])
{
GameOver();/*显示失败*/
snake.life=1;
break;
}
}
if(snake.x[0]<55||snake.x[0]>595||snake.y[0]<55||
snake.y[0]>455)/*蛇是否撞到墙壁*/
{
GameOver();/*本次游戏结束*/
snake.life=1; /*蛇死*/
}
if(snake.life==1)/*以上两种判断以后,如果蛇死就跳出内循环，重新开始*/
break;
if(snake.x[0]==food.x&&snake.y[0]==food.y)/*吃到食物以后*/
{
setcolor(0);/*把画面上的食物东西去掉*/
rectangle(food.x,food.y,food.x+10,food.y-10);
snake.x[snake.node]=-20;snake.y[snake.node]=-20;
/*新的一节先放在看不见的位置,下次循环就取前一节的位置*/
snake.node++;/*蛇的身体长一节*/
food.yes=1;/*画面上需要出现新的食物*/
score+=10;
PrScore();/*输出新得分*/
}
setcolor(4);/*画出蛇*/
for(i=0;i<snake.node;i++)
rectangle(snake.x[i],snake.y[i],snake.x[i]+10,
snake.y[i]-10);
delay(gamespeed);
setcolor(0);/*用黑色去除蛇的的最后一节*/
rectangle(snake.x[snake.node-1],snake.y[snake.node-1],
snake.x[snake.node-1]+10,snake.y[snake.node-1]-10);
} /*endwhile（！kbhit）*/
if(snake.life==1)/*如果蛇死就跳出循环*/
break;
key=bioskey(0);/*接收按键*/
if(key==ESC)/*按ESC键退出*/
break;
else
if(key==UP&&snake.direction!=4)
/*判断是否往相反的方向移动*/
snake.direction=3;
else
if(key==RIGHT&&snake.direction!=2)
snake.direction=1;
else
if(key==LEFT&&snake.direction!=1)
snake.direction=2;
else
if(key==DOWN&&snake.direction!=3)
snake.direction=4;
}/*endwhile(1)*/
}
/*游戏结束*/
void GameOver(void)
{
cleardevice();
PrScore();
setcolor(RED);
settextstyle(0,0,4);
outtextxy(200,200,"GAME OVER");
getch();
}
/*输出成绩*/
void PrScore(void)
{
char str[10];
setfillstyle(SOLID_FILL,YELLOW);
bar(50,15,220,35);
setcolor(6);
settextstyle(0,0,2);
sprintf(str,"score:%d",score);
outtextxy(55,20,str);
}
/*图形结束*/
void Close(void)
{
getch();
closegraph();
}
c/c++ 求助 图形界面
/*把下面的代码保存为资源文件 然后在编译环境中调用DialogBoxParam函数就可以使用了*/
#define IDD_DLG1 1000
#define IDC_EDT1 1001
#define IDC_BTN1 1002
#define IDC_BTN2 1003
#define IDC_BTN3 1004
#define IDC_BTN4 1005
#define IDC_BTN5 1006
#define IDC_BTN6 1007
#define IDC_BTN7 1008
#define IDC_BTN8 1009
#define IDC_BTN9 1010
#define IDC_BTN10 1011
#define IDC_BTN11 1012
#define IDC_BTN12 1013
#define IDC_BTN13 1014
#define IDC_BTN14 1015
#define IDC_BTN15 1016
#define IDC_BTN16 1017
#define IDC_BTN17 1018
#define IDC_BTN18 1019
#define IDC_BTN19 1020
#define IDC_BTN20 1021
#define IDC_BTN21 1022
#define IDC_BTN22 1023
#define IDC_BTN23 1024
#define IDC_BTN24 1025
#define IDC_BTN25 1026
IDD_DLG1 DIALOGEX 6,6,202,140
LANGUAGE 4,2
CAPTION "计算器"
FONT 8,"MS Sans Serif",0,0
STYLE 0x90CA0000
BEGIN
CONTROL "",IDC_EDT1,"Edit",0x50010812,18,12,170,13,0x00000200
CONTROL "1",IDC_BTN1,"Button",0x50010000,18,35,26,13
CONTROL "2",IDC_BTN2,"Button",0x50010000,50,35,26,13
CONTROL "3",IDC_BTN3,"Button",0x50010000,84,35,28,13
CONTROL "i",IDC_BTN4,"Button",0x50010000,120,35,26,13
CONTROL "4",IDC_BTN5,"Button",0x50010000,18,55,26,13
CONTROL "5",IDC_BTN6,"Button",0x50010000,50,55,26,13
CONTROL "6",IDC_BTN7,"Button",0x50010000,84,55,28,13
CONTROL "+",IDC_BTN8,"Button",0x50010000,120,55,26,13
CONTROL "7",IDC_BTN9,"Button",0x50010000,18,75,26,13
CONTROL "8",IDC_BTN10,"Button",0x50010000,50,75,26,13
CONTROL "9",IDC_BTN11,"Button",0x50010000,84,75,28,13
CONTROL "-",IDC_BTN12,"Button",0x50010000,120,75,26,13
CONTROL "+/-",IDC_BTN13,"Button",0x50010000,18,97,26,13
CONTROL "0",IDC_BTN14,"Button",0x50010000,50,97,26,13
CONTROL ".",IDC_BTN15,"Button",0x50010000,84,97,28,13
CONTROL "×",IDC_BTN16,"Button",0x50010000,120,96,26,13
CONTROL "÷",IDC_BTN17,"Button",0x50010000,120,116,26,13
CONTROL "sin",IDC_BTN18,"Button",0x50010000,18,118,26,13
CONTROL "cos",IDC_BTN19,"Button",0x50010000,50,118,26,13
CONTROL "tan",IDC_BTN20,"Button",0x50010000,84,118,28,13
CONTROL "cot",IDC_BTN21,"Button",0x50010000,156,35,28,13
CONTROL "sec",IDC_BTN22,"Button",0x50010000,156,55,28,13
CONTROL "csc",IDC_BTN23,"Button",0x50010000,156,75,28,13
CONTROL "%",IDC_BTN24,"Button",0x50010000,156,96,28,13
CONTROL "=",IDC_BTN25,"Button",0x50010000,156,116,28,13
END
C语言屏幕上显示一个图形时钟用程序绘制一个与时钟样式相似即可
程序运行界面大致如此：
打包好的工程是默认要用VC打开的。如果不用vc的话，代码至少要在VS上进行编译最好。
// test_clock_again.cpp : Defines the entry point for the application.
//
#include"stdafx.h"#include"resource.h"
#include<windows.h>
#include<math.h>
#defineID_TIMER1//计时器ID
#defineTWOPI(2*3.14159)
LRESULTCALLBACKWndProc(HWND,UINT,WPARAM,LPARAM);
intWINAPIWinMain(HINSTANCEhInstance,HINSTANCEhPrevInstance,LPSTRszCmdLine,intiCmdShow)
{
staticTCHARszAppName[]=TEXT("Clock");
HWNDhwnd;
MSGmsg;
WNDCLASSwndclass;
wndclass.cbClsExtra=0;
wndclass.cbWndExtra=0;
wndclass.hbrBackground=(HBRUSH)GetStockObject(WHITE_BRUSH);
wndclass.hCursor=LoadCursor(NULL,IDC_ARROW);
wndclass.hIcon=LoadIcon(NULL,IDI_APPLICATION);
wndclass.hInstance=hInstance;
wndclass.lpfnWndProc=WndProc;
wndclass.lpszClassName=szAppName;
wndclass.lpszMenuName=NULL;
wndclass.style=CS_HREDRAW|CS_VREDRAW;
if(!RegisterClass(&wndclass))
{
MessageBox(NULL,TEXT("ThisprogramrequiresWindowsNT"),szAppName,MB_ICONERROR);
return0;
}
hwnd=CreateWindow(szAppName,TEXT("AnalogClock"),WS_OVERLAPPEDWINDOW,CW_USEDEFAULT,CW_USEDEFAULT,CW_USEDEFAULT,CW_USEDEFAULT,NULL,NULL,hInstance,NULL);
ShowWindow(hwnd,iCmdShow);
UpdateWindow(hwnd);
while(GetMessage(&msg,NULL,0,0))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
returnmsg.wParam;
}
voidSetsotropic(HDChdc,intcxClient,intcyClient)
{
SetMapMode(hdc,MM_ISOTROPIC);
SetWindowExtEx(hdc,1000,1000,NULL);
SetViewportExtEx(hdc,cxClient/2,-cyClient/2,NULL);
SetViewportOrgEx(hdc,cxClient/2,cyClient/2,NULL);
}
voidRotatePoint(POINTpt[],intiNum,intiAngle)
{
inti;
POINTptTemp;
for(i=0;i<iNum;i++)
{
ptTemp.x=(int)(pt[i].x*cos(TWOPI*iAngle/360)+pt[i].y*sin(TWOPI*iAngle/360));
ptTemp.y=(int)(pt[i].y*cos(TWOPI*iAngle/360)-pt[i].x*sin(TWOPI*iAngle/360));
pt[i]=ptTemp;
}
}
voidDrawClock(HDChdc)
{
intiAngle;
POINTpt[3];
for(iAngle=0;iAngle<360;iAngle+=6)
{
pt[0].x=0;
pt[0].y=900;
RotatePoint(pt,1,iAngle);
pt[2].x=pt[2].y=iAngle%5?33:100;
pt[0].x-=pt[2].x/2;
pt[0].y-=pt[2].y/2;
pt[1].x=pt[0].x+pt[2].x;
pt[1].y=pt[0].y+pt[2].y;
SelectObject(hdc,GetStockObject(BLACK_BRUSH));
Ellipse(hdc,pt[0].x,pt[0].y,pt[1].x,pt[1].y);
}
}
voidDrawHands(HDChdc,SYSTEMTIME*pst,BOOLfChange)
{
staticPOINTpt[3][5]={0,-150,100,0,0,600,-100,0,0,-150,
0,-200,50,0,0,800,-50,0,0,-200,
0,0,0,0,0,0,0,0,0,800
};
inti,iAngle[3];
POINTptTemp[3][5];
iAngle[0]=(pst->wHour*30)%360+pst->wMinute/2;
iAngle[1]=pst->wMinute*6;
iAngle[2]=pst->wSecond*6;
memcpy(ptTemp,pt,sizeof(pt));
for(i=fChange?0:2;i<3;i++)
{
RotatePoint(ptTemp[i],5,iAngle[i]);
Polyline(hdc,ptTemp[i],5);
}
}
LRESULTCALLBACKWndProc(HWNDhwnd,UINTmessage,WPARAMwParam,LPARAMlParam)
{
staticintcxClient,cyClient;
staticSYSTEMTIMEstPrevious;
BOOLfChange;
HDChdc;
PAINTSTRUCTps;
SYSTEMTIMEst;
switch(message)
{
caseWM_CREATE:
SetTimer(hwnd,ID_TIMER,1000,NULL);
GetLocalTime(&st);
stPrevious=st;
return0;
caseWM_SIZE:
cxClient=LOWORD(lParam);
cyClient=HIWORD(lParam);
return0;
caseWM_TIMER:
GetLocalTime(&st);
fChange=st.wHour!=stPrevious.wHour||st.wMinute!=stPrevious.wMinute;
hdc=GetDC(hwnd);
Setsotropic(hdc,cxClient,cyClient);
SelectObject(hdc,GetStockObject(WHITE_PEN));
DrawHands(hdc,&stPrevious,fChange);
SelectObject(hdc,GetStockObject(BLACK_PEN));
DrawHands(hdc,&st,TRUE);
stPrevious=st;
return0;
caseWM_PAINT:
hdc=BeginPaint(hwnd,&ps);
Setsotropic(hdc,cxClient,cyClient);
DrawClock(hdc);
DrawHands(hdc,&stPrevious,TRUE);
EndPaint(hwnd,&ps);
return0;
caseWM_DESTROY:
KillTimer(hwnd,ID_TIMER);
PostQuitMessage(0);
return0;
}
returnDefWindowProc(hwnd,message,wParam,lParam);
}
函数Setsotropic用来设置作图的原点 为窗体的中心点。
函数RotatePoint用来沿着原点0,0进行旋转一个多边形，旋转需要用到三角函数。
DrawHands函数用当前的时间计算出时针、分针、秒针的角度，然后根据预设点坐标来画图
0,-150,100,0,0,600,-100,0,0,-150, // 时针
0,-200,50,0,0,800,-50,0,0,-200, // 分针
0,0,0,0,0,0,0,0,0,800 //秒针
能使用C++语言吗 VC不会
里面有些方法是需要调用windows api的。
所以GNU GCC才无法直接编译出来，这跟用C语言还是用C++语言是没有关系的。你要弄清楚这一点。
而且VC并不是一门语言，VC只是一个编译器。它所用的编译库和codeblocks通用c语言编译器不一样罢了。VC用的也是C/C++语言。
怎么把C语言做成软件？
写好后运行就会生成一个.EXE文件啊
只是用C写的没有其他界面而已
转载请注明出处51数据库 » 图形界面软件defin tc界面图形程序8
